DIFFERENTIAL OIL SEAL(for RH Side) REPLACEMENT

PROCEDURE


  1. REMOVE TRANSFER ASSEMBLY

    Click here

  2. REMOVE MANIFOLD STAY


    1. for 3ZR-FE:

      Click here

    2. for 3ZR-FAE:

      Click here

  3. REMOVE DRIVE SHAFT BEARING BRACKET


    1. for 3ZR-FE:

      Click here

    2. for 3ZR-FAE:

      Click here

  4. REMOVE TRANSAXLE CASE OIL SEAL


    1. A01V9E2C01
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, pry out the front transaxle case oil seal.

      Tech Tips

      Tape the screwdriver tip before use.

  5. REMOVE FRONT DIFFERENTIAL CASE OIL SEAL


    1. A01V77YE01

      Using SST, remove the front differential case oil seal.

      SST
      09308-00010

      Note

      Be careful not to damage the differential case.

  6. INSTALL FRONT DIFFERENTIAL CASE OIL SEAL


    1. Coat the lip of a new front differential case oil seal with MP grease.

    2. A01V77JC01
      *a 21.5 to 22.5 mm (0.847 to 0.885 in.)

      Using SST and a hammer, tap in a new front differential case oil seal to the front transaxle case.

      SST
      09950-70010   ( 09951-07200 )
      09950-60010   ( 09951-00410 )
      Standard Depth
      21.5 to 22.5 mm (0.847 to 0.885 in.)

      Note

      Do not damage the front differential case oil seal lip.

  7. INSTALL TRANSAXLE CASE OIL SEAL


    1. Coat the lip of a new transaxle case oil seal with MP grease.

    2. A01V8AOC01
      *a 5.5 to 6.5 mm (0.217 to 0.255 in.)

      Using SST and a hammer, tap in a new transaxle case oil seal to the front transaxle case.

      SST
      09649-17010
      09950-70010   ( 09951-07100 )
      Standard depth
      5.5 to 6.5 mm (0.217 to 0.255 in.)

      Note

      Do not damage the transaxle case oil seal lip.

  8. INSTALL DRIVE SHAFT BEARING BRACKET


    1. for 3ZR-FE:

      Click here

    2. for 3ZR-FAE:

      Click here

  9. INSTALL MANIFOLD STAY


    1. for 3ZR-FE:

      Click here

    2. for 3ZR-FAE:

      Click here

  10. INSTALL TRANSFER ASSEMBLY

    Click here