SHIFT AND SELECT LEVER SHAFT REASSEMBLY

PROCEDURE

1. INSTALL RELEASE HEAD

   
   

   1. Install the release head to the shift and select lever shaft.

   2. 

      *a

      Depth

      Using a 5 mm pin punch and hammer, tap in the slotted spring pin to the shift and select lever shaft.

      Standard depth
      -0.2 to 0.8 mm (-0.00787 to 0.0315 in.)

      Note

      Make sure the installation direction is correct.

2. INSTALL FRONT INNER SHIFT LEVER

   
   

   1. Install the front inner shift lever to the shift and select lever shaft.

   2. 

      *a

      Depth

      Using a 5 mm pin punch and hammer, tap in the front inner shift lever and slotted spring pin to the shift and select lever shaft.

      Standard depth
      -0.2 to 0.8 mm (-0.00787 to 0.0315 in.)

      Note

      Make sure the installation direction is correct.

3. INSTALL INNER NO. 2 SHIFT LEVER

   
   

   1. Install the inner No. 2 shift lever to the shift and select lever shaft.

   2. 

      *a

      Depth

      Using a 5 mm pin punch and hammer, tap in the inner No. 2 shift lever and slotted spring pin to the shift and select lever shaft.

      Standard depth
      0 to 0.6 mm (0 to 0.0236 in.)

      Note

      Make sure the installation direction is correct.