NEUTRAL POSITION SWITCH INSPECTION

PROCEDURE


  1. INSPECT NEUTRAL POSITION SWITCH


    1. A01QOQ7C01
      *a

      Component without harness connected

      (Neutral Position Switch)
      A01QP5R Pushed
      A01QRDS Released

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Pushed Below 1 Ω
      1 - 2 Released 10 kΩ or higher

      If the result is not as specified, replace the neutral position switch.