NEUTRAL POSITION SWITCH INSTALLATION

PROCEDURE

1. INSTALL NEUTRAL POSITION SWITCH

   
   

   1. 

      Using SST, install a new gasket and the neutral position switch to the manual transaxle assembly.

      SST

      09817-16011

      Torque:

      40.2 N*m  { 410 kgf*cm, 30 ft.*lbf }

   2. Connect the neutral position switch connector.

2. INSTALL REAR ENGINE UNDER COVER LH

   
   

   1. Install the rear engine under cover LH with the 4 clips.