BACK-UP LIGHT SWITCH INSTALLATION

PROCEDURE

1. INSTALL BACK-UP LIGHT SWITCH ASSEMBLY

   
   

   1. Using SST, install a new gasket and the back-up light switch assembly to the manual transaxle case.

      SST

      09817-16011

      Torque:

      40.2 N*m  { 410 kgf*cm, 30 ft.*lbf }

   2. Connect the back-up light switch connector.

2. INSTALL BATTERY BRACKET REINFORCEMENT

   Click here

3. INSTALL FRONT BATTERY BRACKET

   Click here

4. CONNECT RADIATOR HOSE SUB-ASSEMBLY

   Click here

5. INSTALL BATTERY TRAY

6. INSTALL BATTERY

7. INSTALL BATTERY CLAMP SUB-ASSEMBLY

   Click here

8. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

   Click here

9. INSTALL AIR CLEANER FILTER ELEMENT

10. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

11. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here