MANUAL TRANSAXLE ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE ENGINE ASSEMBLY WITH MANUAL TRANSAXLE

    Click here

  2. REMOVE STARTER ASSEMBLY

    Click here

  3. REMOVE FRONT ENGINE MOUNTING BRACKET


    1. A01VADA

      Remove the 3 bolts and front engine mounting bracket.

  4. REMOVE REAR ENGINE MOUNTING BRACKET


    1. A01VB0F

      Remove the 4 bolts and rear engine mounting bracket.

  5. REMOVE ENGINE MOUNTING BRACKET LH

    Tech Tips

    Perform this procedure only when replacement of the engine mounting bracket LH is necessary.


    1. A01V7XJ

      Remove the 4 bolts and engine mounting bracket LH from the manual transaxle assembly.

  6. REMOVE OIL PAN INSULATOR

    Click here

  7. REMOVE STIFFENER PLATE LH

    Click here

  8. REMOVE STIFFENER PLATE RH

    Click here

  9. REMOVE MANUAL TRANSAXLE ASSEMBLY

    A01V8UG

    1. Remove the 5 bolts.

    2. Separate and remove the manual transaxle assembly from the engine.

  10. REMOVE TRANSFER ASSEMBLY

    Click here

  11. REMOVE TRANSFER AND TRANSAXLE SETTING STUD BOLT



    1. A01V9VS

      Remove the 2 transfer and transaxle setting stud bolts.

      Tech Tips

      It is not necessary to remove the transfer and transaxle setting stud bolts unless they are being replaced.