DIFFERENTIAL OIL SEAL(for LH Side) REPLACEMENT

PROCEDURE


  1. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH

    Click here

  2. REMOVE TRANSMISSION CASE OIL SEAL

    A01QRM6E11

    1. Using SST, tap out the transmission case oil seal.

      SST
      09308-00010

  3. INSTALL TRANSMISSION CASE OIL SEAL

    A01QRH9C02
    *a -0.5 mm to 0.5 mm (-0.0197 to 0.0196 in.)

    1. Coat the lip of a new transmission case oil seal with MP grease.

    2. Using SST and a hammer, tap in the transmission case oil seal.

      SST
      09608-32010   ( 09951-07200 )
      Standard depth
      -0.5 mm to 0.5 mm (-0.0197 to 0.0196 in.)

      Note

      Do not damage the lip of the transmission case oil seal.

  4. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH

    Click here