MANUAL TRANSAXLE OIL ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT MANUAL TRANSAXLE OIL


    1. Stop the vehicle in a level place.

    2. Remove the No. 1 engine under cover.

      Click here

    3. A00YRRNC02
      *1 Manual Transmission Filler Plug

      Remove the manual transmission filler plug and the gasket.

    4. A00YURUC09
      *a 0 to 5 mm (0 to 0.197 in.)

      Check that the oil level is between 0 to 5 mm (0 to 0.197 in.) from the bottom lip of the manual transmission filler plug opening. If the result is not as specified, add manual transmission oil.

      Note


      • Too much or too little oil may cause trouble.

      • After adjusting the oil level, drive the vehicle and check the oil level again.

    5. Check for oil leakage if the oil level is low.

    6. Install a new gasket and the manual transmission filler plug.

      Torque:
      39.2 N*m  { 400 kgf*cm, 29 ft.*lbf }

    7. Install the No. 1 engine under cover.

      Click here