INPUT SHAFT DISASSEMBLY

PROCEDURE


  1. REMOVE REAR INPUT SHAFT BEARING SHAFT SNAP RING


    1. A00YU59

      Using a snap ring expander, remove the rear input shaft bearing shaft snap ring from the input shaft.

  2. REMOVE REAR INPUT SHAFT RADIAL BALL BEARING


    1. A00YSYTE01

      Using SST, remove the rear input shaft radial ball bearing from the input shaft.

      SST
      09950-40011   ( 09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04011, 09957-04010, 09958-04011 )
      09631-20031

  3. REMOVE 6TH GEAR SUB-ASSEMBLY


    1. A00YSVHN01

      Using SST and press, press out the 6th gear sub-assembly from the input shaft.

      SST
      09950-00020

  4. REMOVE 3RD GEAR


    1. A00YWC9E01

      Using SST and press, press out the 3rd gear from the input shaft.

      SST
      09950-00020
    2. A00YRI9

      Remove the spacer from the input shaft.

  5. REMOVE 4TH GEAR


    1. A00YSFFE01

      Using SST and press, press out the 4th gear from the input shaft.

      SST
      09950-00020

  6. REMOVE INPUT SHAFT SNAP RING


    1. A00YXA8

      Using 2 screwdrivers and a hammer, tap out the input shaft snap ring from the input shaft.

      Note

      Use a piece of cloth to prevent the snap ring from flying off.

  7. REMOVE FRONT INPUT SHAFT BEARING


    1. A00YS7JE01

      Using SST and press, remove the front input shaft bearing from the input shaft.

      SST
      09950-00020