CLUTCH ACCUMULATOR(for Gasoline) REMOVAL

PROCEDURE

1. REMOVE NO. 1 ENGINE UNDER COVER

   Click here

2. REMOVE REAR ENGINE UNDER COVER LH

   Click here

3. REMOVE BATTERY BRACKET REINFORCEMENT

   
   

   • for 2AR-FE:

     Click here

   • for 3ZR-FAE:

     Click here

   • for 3ZR-FE:

     for 1.0 kW Type: Click here

     for 1.3 kW Type: Click here

4. REMOVE CLUTCH ACCUMULATOR ASSEMBLY

   
   

   1. 

      Using a 10 mm union nut wrench, disconnect the accumulator to flexible hose tube from the clutch hose.

      Tech Tips

      Use a container to collect the fluid.

   2. Remove the clip and clutch hose from the clutch accumulator assembly.

   3. 

      Using a 10 mm union nut wrench, loosen the bleeder to accumulator tube labeled A and accumulator to flexible hose tube labeled B.

   4. Remove the bolt, clamp, bleeder to accumulator tube and accumulator to flexible hose tube.

   5. 

      Remove the 3 bolts and clutch accumulator assembly from the manual transaxle assembly.