CLUTCH ACCUMULATOR(for Gasoline) REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER (for 3ZR-FAE)

    Click here

  2. REMOVE NO. 1 ENGINE UNDER COVER (for 2AR-FE, 3ZR-FE)

    Click here

  3. REMOVE REAR ENGINE UNDER COVER LH

    Click here

  4. REMOVE BATTERY BRACKET REINFORCEMENT

    for 2AR-FE for 1.6 kW Type: Click here

    for 2AR-FE for 1.7 kW Type: Click here

    for 3ZR-FAE: Click here

    for 3ZR-FE for 1.0 kW Type: Click here

    for 3ZR-FE for 1.3 kW Type: Click here

  5. REMOVE CLUTCH ACCUMULATOR ASSEMBLY


    1. A01KC4L

      Using a 10 mm union nut wrench, disconnect the accumulator to flexible hose tube from the clutch hose.

      Tech Tips

      Use a container to collect the fluid.

    2. Remove the clip and clutch hose from the clutch accumulator assembly.

    3. A01KCQIN01

      Using a 10 mm union nut wrench, loosen the bleeder to accumulator tube labeled A and accumulator to flexible hose tube labeled B.

    4. Remove the bolt, clamp, bleeder to accumulator tube and accumulator to flexible hose tube.

    5. A01KB4B

      Remove the 3 bolts and clutch accumulator assembly from the manual transaxle assembly.