CLUTCH RELEASE CYLINDER(for 2AD-FTV) INSTALLATION

PROCEDURE


  1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY


    1. Install the clutch release cylinder assembly and No. 1 clutch tube bracket with the 2 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  2. CONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE


    1. A01V7YGC02
      *A for LHD
      *B for RHD

      Temporarily install the clutch release cylinder to flexible hose tube labeled A.

    2. Connect the clutch release cylinder to flexible hose tube with the 3 bolts.

      Torque:
      for bolt B
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
      for bolt C
      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

    3. Using a union nut wrench, tighten the clutch release cylinder to flexible hose tube.

      Torque:
      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench. Click here

  3. BLEED CLUTCH PIPE LINE

    Click here

  4. CHECK FOR BRAKE FLUID LEAKAGE

    Click here

  5. INSTALL BATTERY BRACKET REINFORCEMENT

    Click here