CLUTCH PEDAL(for RHD) REMOVAL

PROCEDURE


  1. ADJUST NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)

    Note

    When removing the No. 2 air duct sub-assembly, change the A/C to DEF mode beforehand, as the No. 1 blower servo sub-assembly may be damaged otherwise.

  2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  3. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY

    Click here

  4. REMOVE CLUTCH PEDAL SUPPORT SUB-ASSEMBLY


    1. A01V8MZ

      Disconnect the 2 connectors and 2 clamps.

    2. A01V7JD

      Push the clutch master cylinder push rod clevis upward and toward the left side of the vehicle.

    3. A01V9OZ

      Remove the 2 bolts, 2 nuts and clutch pedal support sub-assembly.

  5. REMOVE CLUTCH START SWITCH ASSEMBLY

    Click here

  6. REMOVE CLUTCH SWITCH ASSEMBLY

    Click here

  7. REMOVE CLUTCH PEDAL SPRING

    A01V7EE

    1. Remove the clutch pedal spring.

  8. REMOVE CLUTCH PEDAL SUB-ASSEMBLY


    1. A01V8QB

      Remove the bolt, nut and clutch pedal sub-assembly from the clutch pedal support.

  9. REMOVE CLUTCH PEDAL SPRING HOLDER

    A01V8NU

    1. Remove the clutch pedal spring holder.

  10. REMOVE CLUTCH PEDAL SHAFT COLLAR

    A01V8ZM

    1. Remove the 2 bushes and clutch pedal shaft collar.

  11. REMOVE NO. 1 CLUTCH PEDAL CUSHION

    A01V9RV

    1. Remove the No. 1 clutch pedal cushion from the clutch pedal sub-assembly.

  12. REMOVE CLUTCH PEDAL PAD


    1. Remove the clutch pedal pad from the clutch pedal sub-assembly.