AUTOMATIC TRANSAXLE UNIT COMPONENTS
ILLUSTRATION
| *1 | MANUAL VALVE LEVER SHAFT OIL SEAL | *2 | OIL COOLER TUBE UNION |
| *3 | PARK/NEUTRAL POSITION SWITCH ASSEMBLY | *4 | TRANAXLE CASE PLUG |
| *5 | TRANSMISSION BREATHER HOSE SUB-ASSEMBLY | *6 | TRANSMISSION CONTROL SHAFT LEVER |
| *7 | BREATHER PLUG HOSE | *8 | NO. 1 BREATHER PLUG |
| *9 | NO. 2 BREATHER PLUG | *10 | OVERFLOW PLUG |
| *11 | NO. 1 TRANSMISSION OIL FILLER TUBE | *12 | REFILL PLUG |
| *13 | WASHER | *14 | O-RING |
| *15 | GASKET | - | - |
 |
Specified torque: N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
 |
Toyota Genuine ATF WS |  |
MP grease |
ILLUSTRATION
| *1 | AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY | *2 | TRANSAXLE CASE GASKET |
| *3 | TRANSMISSION VALVE BODY ASSEMBLY | *4 | VALVE BODY OIL STRAINER ASSEMBLY |
| *5 | AUTOMATIC TRANSAXLE OIL PAN GASKET | *6 | TRANSMISSION OIL CLEANER MAGNET |
| *7 | O-RING | - | - |
| |
Specified torque: N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
| |
Toyota Genuine ATF WS | ★ | Precoated part |
ILLUSTRATION
| *1 | COUNTER DRIVEN GEAR FRONT TAPERED ROLLER BEARING OUTER RACE | *2 | DIFFERENTIAL GEAR LUBE APPLY TUBE |
| *3 | FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING OUTER RACE | *4 | REAR TRANSAXLE COVER SUB-ASSEMBLY |
| *5 | TRANSAXLE CASE OIL SEAL RH (OUTER) | *6 | TRANSAXLE CASE PLUG |
| *7 | TRANSAXLE HOUSING | *8 | TRANSAXLE HOUSING OIL SEPARATOR |
| *9 | THRUST NEEDLE ROLLER RACE | *10 | THRUST NEEDLE ROLLER BEARING |
| *11 | OIL SEAL RING | *12 | NEEDLE ROLLER BEARING |
| *13 | REAR TRANSAXLE COVER PLATE | *14 | SHIM |
| *15 | CLAMP | *16 | GASKET |
| *17 | O-RING | - | - |
| |
Specified torque: N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
| |
Toyota Genuine ATF WS | |
MP grease |
| ★ | Precoated part | - | - |
ILLUSTRATION
| *1 | 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY | *2 | INPUT SHAFT SUB-ASSEMBLY |
| *3 | NO. 1 BRAKE DISC | *4 | NO. 1 BRAKE PISTON |
| *5 | NO. 3 BRAKE DISC | *6 | NO. 3 BRAKE HUB |
| *7 | OIL PUMP ASSEMBLY | *8 | PLANETARY SUN GEAR SUB-ASSEMBLY |
| *9 | UNDERDRIVE PLANETARY GEAR ASSEMBLY | *10 | UNDERDRIVE PLANETARY SUN GEAR |
| *11 | O-RING | *12 | NO. 1 BRAKE PLATE |
| *13 | SNAP RING | *14 | BRAKE SNAP RING STOPPER |
| *15 | NO. 1 BRAKE FLANGE | *16 | THRUST NEEDLE ROLLER BEARING |
| *17 | OIL SEAL RING | *18 | THRUST NEEDLE ROLLER RACE |
| *19 | NO. 3 BRAKE FLANGE | *20 | NO. 3 BRAKE PLATE |
| *21 | UNDERDRIVE PLANETARY RING GEAR | - | - |
| *a | Once assembled, the underdrive planetary ring gear and No. 3 brake hub cannot be separated. When the underdrive planetary ring gear or No. 3 brake hub is replaced, prepare the following. - UNDERDRIVE PLANETARY RING GEAR - SNAP RING - NO. 3 BRAKE HUB |
- | - |
| |
Specified torque: N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
| |
Toyota Genuine ATF WS | |
MP grease |
ILLUSTRATION
| *1 | 1ST AND REVERSE BRAKE RETURN SPRING SUB-ASSEMBLY | *2 | NO. 2 BRAKE DISC |
| *3 | NO. 2 BRAKE PISTON | *4 | ONE-WAY CLUTCH ASSEMBLY |
| *5 | PLANETARY RING GEAR FLANGE | *6 | DIRECT MULTIPLE DISC CLUTCH ASSEMBLY |
| *7 | REAR PLANETARY SUN GEAR ASSEMBLY | *8 | NO. 2 BRAKE FLANGE |
| *9 | SNAP RING | *10 | NO. 2 BRAKE PLATE |
| *11 | O-RING | *12 | OUTER RACE RETAINER |
| *13 | PLANETARY RING GEAR | *14 | THRUST NEEDLE ROLLER BEARING |
| *15 | THRUST NEEDLE ROLLER RACE | *16 | OIL SEAL RING |
| ● | Non-reusable part | |
Toyota Genuine ATF WS |
ILLUSTRATION
| *1 | FRONT DIFFERENTIAL CASE | *2 | FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING INNER RACE |
| *3 | FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING INNER RACE | *4 | FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING OUTER RACE |
| *5 | MANUAL DETENT SPRING SUB-ASSEMBLY | *6 | MANUAL VALVE LEVER SHAFT SUB-ASSEMBLY |
| *7 | NO. 1 TRANSMISSION CASE PLATE | *8 | PARKING LOCK PAWL |
| *9 | PARKING LOCK ROD SUB-ASSEMBLY | *10 | PARKING LOCK SLEEVE |
| *11 | PAWL SHAFT CLAMP | *12 | PAWL STOPPER PLATE |
| *13 | TRANSAXLE CASE OIL SEAL LH | *14 | PARKING LOCK PAWL SHAFT |
| *15 | TRANSAXLE CASE SUB-ASSEMBLY | *16 | SPRING |
| *17 | MANUAL VALVE LEVER SHAFT RETAINER SPRING | *18 | PARKING LOCK PAWL PIN |
| *19 | MANUAL DETENT SPRING COVER | - | - |
| |
Specified torque: N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
| |
MP grease | ★ | Precoated part |
ILLUSTRATION
| *1 | COUNTER DRIVE GEAR | *2 | COUNTER DRIVE GEAR NUT |
| *3 | COUNTER DRIVEN GEAR | *4 | COUNTER DRIVEN GEAR FRONT TAPERED ROLLER BEARING |
| *5 | COUNTER DRIVEN GEAR REAR TAPERED ROLLER BEARING | *6 | COUNTER DRIVEN GEAR REAR TAPERED ROLLER BEARING OUTER RACE |
| *7 | FRONT PLANETARY GEAR ASSEMBLY | *8 | NO. 3 BRAKE PISTON |
| *9 | BEARING INNER RACE (FRONT SIDE) | *10 | BEARING INNER RACE (REAR SIDE) |
| *11 | COUNTER DRIVE GEAR BEARING | *12 | BRAKE PISTON RETURN SPRING |
| *13 | SNAP RING | *14 | O-RING |
| *a | The counter drive gear bearing cannot be separated from the transaxle case. When the counter drive gear bearing or transaxle case is replaced, prepare the following - COUNTER DRIVE GEAR BEARING - SNAP RING - TRANSAXLE CASE |
- | - |
| |
Specified torque: N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
| |
Toyota Genuine ATF WS | - | - |