TRANSMISSION CONTROL CABLE ADJUSTMENT

PROCEDURE

1. ADJUST SHIFT LEVER POSITION

   
   

   1. Apply the parking brake and move the shift lever to N.

   2. Remove the front console box.

      Click here

   3. 

      *1	Slider
      *2	Lock Piece
      *a	Slide
      *b	Pull

      Slide the slider of the transmission control cable assembly in the direction indicated by the arrow and pull the lock piece outward.

   4. Install the end of the transmission control cable assembly to the shift lever assembly.

      Note

      
      

      • Check that the lock piece is pulled up.

      
      

      • Install the cable end all the way to the base of the pin.

   5. 

      *1	Adjuster Case
      *a	Push in

      Push the lock piece into the adjuster case.

      Note

      
      

      • Check that the park/neutral position switch assembly and the shift lever are in neutral.

      
      

      • Securely push in the lock piece until the slider lock is engaged.

   6. After adjusting the shift lever position, check the operation and function of the shift lever. If there is a problem, adjust the position again.

   7. Install the front console box.

      Click here