SHIFT LEVER DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE SHIFT LOCK RELEASE BUTTON COVER


    1. A01CW28

      Detach the 2 claws and remove the shift lock release button cover from the upper console panel sub-assembly.

  2. REMOVE POSITION INDICATOR HOUSING

    A01CWW7

    1. Remove the 4 screws and position indicator housing from the rear upper console panel sub-assembly.

  3. REMOVE CONTROL POSITION INDICATOR PLATE

    A01CX7D

    1. Detach the claw and remove the control position indicator plate.

  4. REMOVE POSITION INDICATOR LENS


    1. A01CW9P

      Detach the 4 claws and remove the position indicator lens.

  5. REMOVE POSITION INDICATOR SLIDE COVER

    A01CXEF

    1. Remove the position indicator slide cover together with No. 2 position indicator slide cover from the position indicator housing.

  6. REMOVE NO. 2 POSITION INDICATOR SLIDE COVER

    A01CXVK

    1. Remove the No. 2 position indicator slide cover from the position indicator slide cover.

  7. REMOVE INDICATOR LIGHT


    1. A01CY3A

      Disconnect the connector.

    2. Using a plastic bag, detach the claw and remove the indicator light from the position indicator housing.

  8. REMOVE SHIFT LOCK RELEASE BUTTON


    1. A01CYFH

      Detach the 2 claws and remove the shift lock release button and spring from the position indicator housing.