TRANSMISSION WIRE INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION WIRE

   
   

   1. Install the transmission wire onto the transmission valve body assembly with the bolt and lock plate.

      Torque:

      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

   2. Coat a new O-ring with ATF, and install them to the temperature sensor.

   3. Connect the temperature sensor onto the transmission valve body assembly with the bolt and lock plate.

      Torque:

      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

   4. Engage the clamp and connect the transmission wire.

   5. Connect the 7 connectors of the shift solenoid valve.

   6. Connect the connector of the transmission revolution sensor.

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

   Click here