SPEED SENSOR INSTALLATION

PROCEDURE


  1. INSTALL TRANSMISSION REVOLUTION SENSOR


    1. A01GB0LC01

      Temporarily install the transmission revolution sensor onto the transmission valve body assembly with the 2 bolts.

      Note

      Do not use a transmission revolution sensor that has been dropped.

    2. Tighten the 2 bolts in the order shown in the illustration.

      Torque:
      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

    3. Connect the connector of the transmission revolution sensor.

  2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

    Click here