OIL PUMP REASSEMBLY

PROCEDURE


  1. INSTALL FRONT OIL PUMP OIL SEAL


    1. A00YWWKN01

      Using SST and a hammer, install a new front oil pump oil seal to the front oil pump body sub-assembly.

      SST
      09350-32014   ( 09351-32140 )
      Oil seal driven in depth
      -0.25 to 0.25 mm (-0.00984 to 0.00984 in.)

    2. Coat the lip of the front oil pump oil seal with MP grease.

  2. INSTALL FRONT OIL PUMP BODY O-RING


    1. A00YXIR

      Coat a new O-ring with ATF and install it to the front oil pump body sub-assembly.

      Note

      Ensure that the O-ring is not twisted.

  3. INSTALL FRONT OIL PUMP DRIVEN GEAR


    1. A00YT2V

      Coat the front oil pump driven gear with ATF and install it to the front oil pump body sub-assembly with the marked side facing up.

  4. INSTALL FRONT OIL PUMP DRIVE GEAR


    1. A00YQSK

      Coat the front oil pump drive gear with ATF, and install it to the front oil pump body sub-assembly with the marked side facing up.

  5. INSTALL STATOR SHAFT ASSEMBLY


    1. A00YTL0N02

      Align each knock pin of the stator shaft assembly with the holes in the front oil pump body sub-assembly and install the stator shaft assembly to the front oil pump body sub-assembly.

    2. Using a T30 "TORX" socket wrench, install the 16 bolts.

      Torque:
      9.3 N*m  { 95 kgf*cm, 82 in.*lbf }

      Tech Tips

      Bolt Length

      Bolt A: 14 mm (0.551 in.)

      Bolt B: 26 mm (1.02 in.)

  6. INSPECT OIL PUMP ASSEMBLY

    Click here