LANE DEPARTURE ALERT BUZZER(for RHD) INSTALLATION

PROCEDURE

1. INSTALL SKID CONTROL BUZZER ASSEMBLY (LANE DEPARTURE ALERT BUZZER)

   
   

   1. Connect the connector.

   2. Attach the clamp to install the skid control buzzer assembly (lane departure alert buzzer).

2. INSTALL HEATER TO REGISTER DUCT ASSEMBLY

   Click here

3. INSTALL DEFROSTER NOZZLE ASSEMBLY

   Click here

4. INSTALL UPPER INSTRUMENT PANEL

   Click here

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

6. CHECK SRS WARNING LIGHT

   Click here