LANE DEPARTURE ALERT SWITCH(for RHD) INSTALLATION

PROCEDURE

1. INSTALL LANE-KEEPING ASSIST MAIN SWITCH (LANE DEPARTURE ALERT SWITCH)

   
   

   1. Attach the 2 claws to install the lane-keeping assist main switch (lane departure alert switch).

2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

   Click here

3. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here