LANE DEPARTURE ALERT SWITCH(for RHD) INSPECTION

PROCEDURE


  1. INSPECT LANE DEPARTURE ALERT MAIN SWITCH


    1. A01PI2TC01
      *a

      Component without harness connected

      (Lane Departure Alert Main Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      6 (ECU) - 3 (GND) LDA switch pushed Below 1 Ω
      6 (ECU) - 3 (GND) LDA switch not pushed 10 kΩ or higher

      If the result is not as specified, replace the lane departure alert main switch.