LANE DEPARTURE ALERT SWITCH(for LHD) INSPECTION

PROCEDURE


  1. INSPECT TELLTALE LIGHT ASSEMBLY (LANE DEPARTURE ALERT SWITCH)


    1. A00YTQZC01
      *a

      Component without harness connected

      (Telltale Light Assembly (Lane Departure Alert Switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      6 (ECU) - 13 (E) LDA switch pushed Below 1 Ω
      6 (ECU) - 13 (E) LDA switch not pushed 10 kΩ or higher

      If the result is not as specified, replace the telltale light assembly (lane departure alert switch).