LANE DEPARTURE ALERT SWITCH(for LHD) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  4. REMOVE TELLTALE LIGHT ASSEMBLY (LANE DEPARTURE ALERT SWITCH)


    1. A01KCVQ

      Detach the 2 clips and claw.

    2. A01KBUW

      Disconnect the connector to remove the telltale light assembly (lane departure alert switch).