LANE DEPARTURE ALERT SWITCH(for RHD) REMOVAL

PROCEDURE

1. PRECAUTION

   Note

   After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

   Click here

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

3. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY

   Click here

4. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

   Click here

5. REMOVE LANE-KEEPING ASSIST MAIN SWITCH (LANE DEPARTURE ALERT SWITCH)

   
   

   1. 

      Detach the 2 claws and remove the lane-keeping assist main switch (lane departure alert switch).