LANE DEPARTURE ALERT SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL TELLTALE LIGHT ASSEMBLY (LANE DEPARTURE ALERT SWITCH)


    1. Connect the connector.

    2. Attach the claw and 2 clips to install the telltale light assembly (lane departure alert switch).

  2. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here