LANE RECOGNITION CAMERA SENSOR REMOVAL

PROCEDURE


  1. REMOVE RAIN SENSOR COVER


    1. A01V908

      Detach the 2 claws and remove the rain sensor cover as shown in the illustration.

  2. REMOVE INNER REAR VIEW MIRROR ASSEMBLY


    1. w/o EC Mirror:

      Click here

    2. w/ EC Mirror:

      Click here

  3. REMOVE LANE DEPARTURE WARNING CAMERA COVER NO.1


    1. A01V6WR

      Pull the lane departure warning camera cover in the direction indicated by the arrow to detach the 4 guides and remove the lane departure warning camera cover as shown in the illustration.

  4. REMOVE LANE DEPARTURE WARNING CAMERA


    1. A01V7T3N01

      Disconnect the connector.

    2. Detach the 3 guides and remove the lane departure warning camera as shown in the illustration.

      Note


      • Do not pull the harness forcibly when disconnecting the connector.

      • If the lane departure warning camera bracket is deformed or damaged, replace it together with the windshield glass.

      • If the windshield glass is replaced on a vehicle equipped with an lane departure alert camera, make sure to use a Toyota genuine part, as the camera may not be able to be installed due to a missing bracket or the lane departure alert system may not operate properly due to a difference in the transmissivity or ceramic line shape.

      • If the lane departure warning camera is dropped, replace it with a new one.