RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT STARTER NO. 1 RELAY (ST NO. 1)


    1. A01V9YJN06

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
      Battery voltage applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the starter No. 1 relay.

  2. INSPECT STARTER NO. 2 RALAY (ST NO. 2)


    1. A01V9YJN06

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
      Battery voltage applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the starter No. 2 relay.