STARTER(for 1.6 kW Type) INSTALLATION

PROCEDURE


  1. INSTALL STARTER ASSEMBLY


    1. Install the starter assembly with the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    2. Connect the starter wire with the nut.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    3. Connect the starter connector.

    4. Install the terminal cap.

  2. INSTALL BATTERY BRACKET REINFORCEMENT


    1. Install the battery bracket reinforcement with the 2 bolts.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

  3. INSTALL FRONT BATTERY BRACKET


    1. Install the front battery bracket with the 4 bolts.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

  4. INSTALL BATTERY TRAY

  5. INSTALL BATTERY

  6. INSTALL BATTERY INSULATOR

  7. INSTALL BATTERY CLAMP SUB-ASSEMBLY


    1. A01V6Y6C01
      *1 Bolt
      *2 Nut

      Attach the hook of the battery clamp sub-assembly to the front battery bracket.

    2. Partially tighten the nut and temporarily install the bolt.

    3. Adjust the battery clamp sub-assembly position.

    4. Tighten the nut and bolt.

      Torque:
      for bolt
      17 N*m  { 173 kgf*cm, 13 ft.*lbf }
      for nut
      4.9 N*m  { 50 kgf*cm, 43 in.*lbf }

    5. Attach the 2 wire harness clamps.

  8. CONNECT CABLE TO POSITIVE BATTERY TERMINAL


    1. Connect the cable to the positive (+) battery terminal.

      Torque:
      5.4 N*m  { 55 kgf*cm, 4 ft.*lbf }

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here