GLOW PLUG REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE NO. 1 ENGINE COVER

    Click here

  4. REMOVE NO. 2 EGR PIPE SUB-ASSEMBLY

    Click here

  5. REMOVE ENGINE COVER BRACKET


    1. B0029LA

      Disconnect the glow plug connector.

    2. Remove the bolt, nut and engine cover bracket.

    3. Remove the bolt and disconnect the engine wire so that the glow plugs can be removed in a later step.

  6. REMOVE NO. 1 GLOW PLUG CONNECTOR


    1. B0029AP

      Remove the 4 screw grommets.

    2. B002AKJ

      Detach the clamp and disconnect the glow plug connector from the bracket.

    3. B002AFL

      Remove the 4 nuts and No. 1 glow plug connector.

  7. REMOVE GLOW PLUG ASSEMBLY


    1. B002A5H

      Using a 10 mm deep socket wrench, remove the 4 glow plugs.