GLOW PLUG CONTROLLER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE FRONT FENDER LINER LH


    1. Partially remove the front fender liner LH.

      Tech Tips

      It is not necessary to fully remove the front fender liner LH.

      Partially remove it so that the glow plug controller assembly can be removed.

  4. REMOVE GLOW PLUG CONTROLLER ASSEMBLY


    1. B002AI1

      Disconnect the 4 glow plug controller connectors.

    2. Remove the 2 bolts and glow plug controller assembly.

  5. REMOVE GLOW PLUG CONTROLLER BRACKET


    1. B0029H4

      Remove the 4 screws and 2 glow plug controller brackets from the glow plug controller.