OIL PUMP COMPONENTS
ILLUSTRATION
| *1 | FUEL DELIVERY PIPE SUB-ASSEMBLY | *2 | FUEL INJECTOR ASSEMBLY |
| *3 | FUEL TUBE SUB-ASSEMBLY | *4 | THROTTLE BODY ASSEMBLY |
| *5 | VACUUM SURGE TANK | *6 | GASKET |
| *7 | NO. 1 DELIVERY PIPE SPACER | *8 | O-RING |
| *9 | INJECTOR VIBRATION INSULATOR | *10 | NO. 2 FUEL PIPE CLAMP |
| *a | for Type A | *b | for Type B |
 |
Specified torque: N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
ILLUSTRATION
| *1 | ENGINE OIL LEVEL DIPSTICK GUIDE | *2 | EXHAUST MANIFOLD |
| *3 | IGNITION COIL ASSEMBLY | *4 | INTAKE MANIFOLD |
| *5 | MANIFOLD STAY | *6 | NO. 1 EXHAUST MANIFOLD HEAT INSULATOR |
| *7 | NO. 1 WATER BY-PASS PIPE | *8 | NO. 3 WATER BY-PASS HOSE |
| *9 | PCV HOSE | *10 | WATER BY-PASS HOSE |
| *11 | WATER INLET HOSE | *12 | GASKET |
| *13 | ENGINE OIL LEVEL DIPSTICK | *14 | AIR TUBE |
| *15 | O-RING | *16 | INTAKE MANIFOLD STAY |
| |
Specified torque: N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
ILLUSTRATION
| *1 | CYLINDER HEAD COVER GASKET | *2 | CYLINDER HEAD COVER SUB-ASSEMBLY |
| *3 | SEAL WASHER | *4 | GASKET |
| |
Specified torque: N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
ILLUSTRATION
| *1 | CRANKSHAFT PULLEY | *2 | ENGINE MOUNTING BRACKET STUD BOLT |
| *3 | NO. 1 CHAIN TENSIONER ASSEMBLY | *4 | OIL FILTER CAP ASSEMBLY |
| *5 | THERMOSTAT | *6 | TIMING CHAIN COVER OIL SEAL |
| *7 | TIMING CHAIN COVER SUB-ASSEMBLY | *8 | WATER INLET |
| *9 | GASKET | *10 | O-RING |
| *11 | OIL FILTER ELEMENT | *12 | ENGINE WATER PUMP ASSEMBLY |
| *13 | SEAL WASHER | *14 | ENGINE MOUNTING BRACKET RH |
| *15 | OIL FILTER BRACKET | *16 | BRACKET |
| |
Specified torque: N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
 |
MP grease | ★ | Precoated part |
ILLUSTRATION
| *1 | CHAIN SUB-ASSEMBLY | *2 | CHAIN TENSIONER SLIPPER |
| *3 | CRANKSHAFT TIMING SPROCKET | *4 | NO. 1 CHAIN VIBRATION DAMPER |
| *5 | NO. 2 CHAIN SUB-ASSEMBLY | *6 | NO. 2 CHAIN VIBRATION DAMPER |
| *7 | NO. 2 OIL PAN SUB-ASSEMBLY | *8 | OIL PUMP ASSEMBLY |
| *9 | O-RING | *10 | OIL PUMP DRIVE GEAR |
| *11 | OIL PUMP DRIVE SHAFT GEAR | *12 | CHAIN DAMPER SPRING |
| *13 | CHAIN TENSIONER PLATE | *14 | GASKET |
| *15 | OIL PAN DRAIN PLUG | - | - |
| |
Specified torque: N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
ILLUSTRATION
| *1 | OIL PUMP COVER SUB-ASSEMBLY | *2 | OIL PUMP RELIEF VALVE |
| *3 | OIL PUMP BODY | *4 | OIL PUMP DRIVEN ROTOR |
| *5 | OIL PUMP DRIVE ROTOR | *6 | OIL PUMP RELIEF VALVE SPRING |
| *7 | OIL PUMP RELIEF VALVE PLUG | - | - |
| |
Specified torque: N*m (kgf*cm, ft.*lbf) | - | - |