DIFFERENTIAL OIL SEAL(for RH Side) REPLACEMENT

PROCEDURE


  1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

    Click here

  2. REMOVE TRANSFER ASSEMBLY

    Click here

  3. REMOVE TRANSAXLE CASE OIL SEAL RH


    1. A01KAJFC01
      *a Protective Tape

      Outer:

      Using a screwdriver with its tip wrapped with vinyl tape, pry out the transaxle case oil seal RH.

      Note

      Be careful not to damage the housing.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01KDMEN05

      Inner:

      Using SST, tap out the transaxle case oil seal RH.

      SST
      09308-00010

      Note

      Be careful not to damage the housing.

  4. INSTALL TRANSAXLE CASE OIL SEAL RH


    1. A01KCMCN03

      Inner:


      1. Coat the lip of a new transaxle case oil RH seal with MP grease.

      2. Using SST and a hammer, tap in the transaxle case oil seal RH.

        SST
        09950-60010   ( 09951-00410, 09951-07200 )
        Standard depth
        21.5 to 22.5 mm (0.847 to 0.885 in.)
    2. A01KCYKN02

      Outer:


      1. Coat the lip of a new transaxle case oil seal with MP grease.

      2. Using SST and a hammer, tap in the transaxle case oil seal RH.

        SST
        09649-17010   ( 09951-07200 )
        Standard depth
        5.5 to 6.5 mm (0.217 to 0.255 in.)

        Note

        Make sure that the transaxle oil seal RH is installed in the correct direction.

  5. INSTALL TRANSFER ASSEMBLY

    Click here

  6. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY

    Click here