SHIFT PADDLE SWITCH INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION SHIFT SWITCH ASSEMBLY

   
   

   1. Connect the 2 connectors to the 2 transmission shift switch assemblies.

   2. 

      *1	Cable Tie
      *a	0 to 40°
      *b	1 to 3 mm (0.0394 to 0.118 in.)

      Install 2 new cable ties as shown in the illustration.

   3. Attach the 6 guides to install the No. 1 switch wire.

   4. Attach the 4 pins and install the 2 transmission shift switch assemblies to the steering wheel boss lower cover.

2. INSTALL STEERING WHEEL BOSS LOWER COVER

   Click here