THERMOSTAT INSTALLATION

PROCEDURE

1. INSTALL THERMOSTAT

   
   

   1. Install a new gasket to the thermostat.

   2. 

      *1	Jiggle Valve

      Install the thermostat with the jiggle valve facing upward.

      Tech Tips

      The jiggle valve may be set to within 10° on either side of the prescribed position.

2. INSTALL WATER INLET

   
   

   1. Install the water inlet with the 2 nuts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

3. CONNECT NO. 2 RADIATOR HOSE

   
   

   1. Connect the No. 2 radiator hose to the water inlet, and slide the hose clamp to secure it.

4. INSTALL GENERATOR ASSEMBLY

   Click here

5. ADD ENGINE COOLANT

   Click here

6. INSPECT FOR COOLANT LEAK

   Click here

7. INSTALL NO. 1 ENGINE UNDER COVER

   Click here

8. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

   Click here