WATER PUMP REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  2. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  3. DRAIN ENGINE COOLANT

    Click here

  4. REMOVE GENERATOR ASSEMBLY


  5. REMOVE DUST COVER (w/ Cover)


    1. A01VAE4C02
      *a Protective Tape

      Using a screwdriver, remove the dust cover.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

    A01VALTC01
    *A w/ Cover
    *B w/o Cover

    1. Remove the bolt and V-ribbed belt tensioner assembly.

  7. REMOVE ENGINE WATER PUMP ASSEMBLY


    1. A01VAV1

      Detach the clamp of the wire harness from the wire harness bracket.

    2. Remove the bolt and wire harness bracket.

    3. A01V7Q2

      Remove the 7 bolts, engine water pump assembly and water pump gasket.