INTAKE MANIFOLD REMOVAL

PROCEDURE


  1. REMOVE THROTTLE BODY ASSEMBLY

    Click here

  2. REMOVE VACUUM SWITCHING VALVE (for ACIS)


    1. A01GD9D

      Remove the engine cover joint and disconnect the wire harness clamp bracket.

    2. Detach the wire harness clamp.

    3. Disconnect the vacuum switching valve connector.

    4. Disconnect the vacuum hose and No. 2 air hose.

    5. Remove the bolt and vacuum switching valve.

  3. REMOVE INTAKE MANIFOLD


    1. A01GAHR

      Detach the 4 wire harness clamps.

    2. A01GANY

      Disconnect the No. 1 fuel vapor feed hose and No. 3 air hose from the intake manifold.

    3. Slide the 2 clamps and disconnect the PCV hose and No. 1 vacuum transmitting hose from the intake manifold.

    4. A01GC7B

      Remove the 5 bolts, 2 nuts, intake manifold and intake manifold stay.

    5. A01GBAH

      Remove the gasket from the intake manifold.

    6. A01GA5H

      Remove the bolt and wire harness clamp bracket from the intake manifold.

    7. with Stud Bolt:

      Using an E6 "TORX" socket wrench, remove the 2 stud bolts from the intake manifold.

  4. REMOVE ENGINE COVER JOINT


    1. A01GBN4

      Remove the engine cover joint.