EXHAUST GAS TEMPERATURE SENSOR(for Sensor 2) REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER

    Click here

  2. REMOVE EXHAUST GAS TEMPERATURE SENSOR (for Sensor 2)

    Note

    If the exhaust gas temperature sensor is dropped, replace it with a new one.


    1. A01TC0R

      Disconnect the exhaust gas temperature sensor connector.

    2. Detach the wire harness clamp.

    3. Disconnect the wire harness from the hook on the cylinder head cover side.

    4. Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor.