EGR BYPASS VALVE SWITCHING VALVE INSPECTION

PROCEDURE


  1. INSPECT NO. 1 VACUUM SWITCHING VALVE ASSEMBLY


    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 28.3 to 31.1 Ω
    2. A00YVOUC03
      A00YXOY Air

      Check No. 1 vacuum switching valve assembly operation.


      1. Check that air does not flow from port A to port B.

      2. A00YVAZC03
        A00YXOY Air

        Apply battery voltage across terminals 1 and 2 as shown in the illustration.

      3. Check that air flows from port A to port B.

        If the result is not as specified, replace the No. 1 vacuum switching valve assembly.