EXHAUST FUEL ADDITION INJECTOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE NO. 1 ENGINE COVER

    Click here

  4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  5. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  6. REMOVE AIR CLEANER CASE

    Click here

  7. REMOVE FUEL HOSE PROTECTOR


    1. A01V7AJ

      Disconnect the exhaust fuel addition injector connector.

    2. A01V6VY

      Remove the bolt and fuel hose protector.

  8. REMOVE FUEL TUBE SUB-ASSEMBLY

    Click here

  9. REMOVE EXHAUST FUEL ADDITION INJECTOR ASSEMBLY


    1. A01V9A5C02
      *1 Washer
      *2 Nozzle Holder Clamp

      Remove the bolt, washer, nozzle holder clamp, exhaust fuel addition injector assembly and gasket.

  10. REMOVE FUEL INJECTOR SEAL


    1. A01V8QLC02
      *1 Fuel Injector Seal

      Remove the fuel injector seal from the exhaust fuel addition injector assembly.