MONOLITHIC CONVERTER REMOVAL

PROCEDURE

1. REMOVE ENGINE ASSEMBLY

   Click here

2. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR

   
   

   1. 

      Remove the 5 bolts and No. 1 manifold converter insulator.

3. REMOVE MANIFOLD STAY

   
   

   1. 

      Remove the bolt, nut and manifold stay.

4. REMOVE NO. 2 MANIFOLD STAY

   
   

   1. 

      Remove the 3 bolts and No. 2 manifold stay.

5. REMOVE NO. 2 EXHAUST MANIFOLD STAY

   
   

   1. 

      Remove the 2 bolts, nut and No. 2 exhaust manifold stay.

6. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

   
   

   1. 

      Disconnect the 2 exhaust gas temperature sensor connectors.

   2. 

      Remove the 3 nuts and exhaust manifold converter sub-assembly.

   3. Remove the gasket from the turbocharger sub-assembly.

7. REMOVE VACUUM TRANSMITTING HOSE ASSEMBLY

   

   
   

   1. Slide the clamp and disconnect the vacuum transmitting hose assembly from the No. 1 vacuum pipe.

8. REMOVE NO. 2 VACUUM TRANSMITTING HOSE ASSEMBLY

   

   
   

   1. Slide the clamp and disconnect the No. 2 vacuum transmitting hose assembly from the No. 2 vacuum pipe.

9. REMOVE EXHAUST GAS TEMPERATURE SENSOR

   Click here

10. REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR

    Click here

11. REMOVE NO. 1 VACUUM PIPE

    
    

    1. 

       Using a 17 mm union nut wrench, loosen the union nut.

    2. Remove the bolt and No. 1 vacuum pipe.

12. REMOVE NO. 2 VACUUM PIPE

    
    

    1. 

       Using a 14 mm union nut wrench, loosen the union nut.

    2. Remove the bolt and No. 2 vacuum pipe.

13. REMOVE NO. 2 MANIFOLD CONVERTER INSULATOR

    
    

    1. 

       Remove the 3 bolts and No. 2 manifold converter insulator.