FUEL PUMP DISASSEMBLY

CAUTION / NOTICE / HINT

Note

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click here

PROCEDURE


  1. REMOVE NO. 1 FUEL SUB-TANK


    1. A01QPF1

      Disconnect the wire harness connector.

    2. A01QTSSC01
      *1 Fuel Suction Plate
      *2 E-Ring
      A01QRKS Lower

      Using needle nose pliers, remove the E-ring.

      Tech Tips

      Slightly lower the fuel suction plate to remove the E-ring.

    3. A01QPTK

      Remove the 2 springs from the fuel suction plate.

    4. A01QTVL

      Detach the 2 claws and remove the No. 1 fuel sub-tank.

    5. A01QS61

      Detach the claw of the jet pump nozzle.

    6. A01QQJFC01
      *1 Jet Pump
      *2 Protective Tape

      Using a screwdriver, remove the jet pump.

      Tech Tips

      Tape the screwdriver tip before use.

    7. A01QR4JC01
      *1 Jet Pump
      *2 O-Ring

      Remove the O-ring from the jet pump.

  2. REMOVE NO. 1 FUEL SUCTION SUPPORT


    1. A01QRCN

      Using needle nose pliers, detach the 2 claws and remove the No. 1 fuel suction support.

  3. REMOVE FUEL PUMP


    1. A01QSR4

      Detach the 5 claws on the fuel filter assembly and remove the fuel pump from the fuel filter assembly.

      Note

      When detaching the claw, do not disconnect the fuel main tube.

    2. A01QU4L

      Disconnect the fuel pump connector.

    3. A01QOP4C01
      *1 O-Ring
      *2 Fuel Pump Spacer

      Remove the O-ring from the fuel filter assembly.

    4. Remove the fuel pump spacer from the fuel pump.