FUEL SENDER GAUGE ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY

    A00YTFNC01
    *1 F (Upper)
    *2 1/2
    *3 E (Lower)
    *a

    Component without harness connected

    (Fuel Sender Gauge Assembly)

    1. Check that the float moves smoothly between F and E.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Float level is F (upper) 13.5 to 16.5 Ω
      1 - 2 1/2 200.3 to 224.7 Ω
      1 - 2 Float level is E (lower) 405.5 to 414.5 Ω

      If the result is not as specified, replace the fuel sender gauge assembly.