FUEL TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL FUEL TEMPERATURE SENSOR

    Note

    If the fuel temperature sensor is dropped, replace it with a new one.


    1. Apply a light coat of engine oil to a new O-ring.

    2. Install the O-ring to the fuel temperature sensor.

    3. Temporarily install the fuel temperature sensor to the fuel supply pump assembly.

    4. A01V8NAC01
      *a Fulcrum length

      Using SST, tighten the fuel temperature sensor.

      SST
      09922-10010

      Note

      Use the formula to calculate special torque values for situations where a SST is combined with a torque wrench.

      Click here

      Torque:
      without SST
      22 N*m  { 224 kgf*cm, 16 ft.*lbf }
      with SST
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

  2. INSTALL FUEL SUPPLY PUMP ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. PERFORM INITIALIZATION

    Click here

  5. BLEED AIR FROM FUEL SYSTEM

    Click here

  6. INSPECT FOR FUEL LEAK

    Click here