COMMON RAIL REMOVAL

CAUTION / NOTICE / HINT

Note


  • When replacing the injector assemblies (including shuffling the injector assemblies between the cylinders), common rail assembly, intake manifold or cylinder head sub-assembly, it is necessary to replace the injection pipes with new ones.

  • When replacing the fuel supply pump assembly, common rail assembly, intake manifold or cylinder head sub-assembly, it is necessary to replace the fuel inlet pipe sub-assembly with a new one.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE NO. 1 ENGINE COVER

    Click here

  4. DISCONNECT ENGINE WIRE

    Click here

  5. REMOVE INJECTION PIPE SUB-ASSEMBLY

    Click here

  6. REMOVE FUEL INLET PIPE SUB-ASSEMBLY

    Click here

  7. REMOVE COMMON RAIL ASSEMBLY


    1. A01KB4J

      Slide the clamp and disconnect the No. 4 fuel hose from the common rail assembly.

    2. Remove the 2 bolts and common rail assembly.