CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL CAMSHAFT POSITION SENSOR

   
   

   1. Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

      Note

      
      

      • When reusing the camshaft position sensor, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing the camshaft position sensor.

   2. Using an E6 "TORX" socket wrench, install the camshaft position sensor with the bolt.

      Torque:

      3.6 N*m  { 37 kgf*cm, 32 in.*lbf }

      Note

      
      

      • Avoid physical shock to the camshaft position sensor.

      • Make sure that the O-ring is not cracked or jammed when installing the camshaft position sensor.

   3. Connect the camshaft position sensor connector.

2. INSTALL ENGINE COVER

   Click here

3. INSTALL NO. 1 ENGINE COVER

   Click here