MASS AIR FLOW METER INSPECTION

PROCEDURE


  1. INSPECT MASS AIR FLOW METER SUB-ASSEMBLY


    1. A01LXD4C01
      *a

      Component without harness connected

      (Mass Air Flow Meter Sub-assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 (THA) - 2 (E2G) -20°C (-4°F) 12900 to 14700 Ω
      20°C (68°F) 2300 to 2500 Ω
      60°C (140°F) 587 to 625 Ω

      If the result is not as specified, replace the mass air flow meter sub-assembly.