IGNITION COIL AND SPARK PLUG INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

Perform "Inspection After Repairs" after replacing the ignition coil assembly or the spark plug.


PROCEDURE


  1. INSTALL SPARK PLUG


    1. Using a 14 mm spark plug wrench and 100 mm extension bar, install the 4 spark plugs.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Tech Tips

      Perform "Inspection After Repairs" after replacing the spark plug.


  2. INSTALL IGNITION COIL ASSEMBLY


    1. A01QREQC03
      *1 Cylinder Head Cover
      *2 Spark Plug Tube
      *3 Plug Cap

      Install the 4 ignition coil assemblies with the 4 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      When installing the ignition coil, do not damage the plug cap with the cylinder head cover opening or the upper edge of the spark plug tube.

      Tech Tips

      Perform "Inspection After Repairs" after replacing the ignition coil assembly.


    2. Connect the 4 ignition coil assembly connectors.

  3. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here