HEATED OXYGEN SENSOR REMOVAL

PROCEDURE


  1. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY

    Click here

  2. REMOVE FRONT FLOOR COVER

    Click here

  3. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)


    1. A01QS3W

      Disconnect the heated oxygen sensor connector.

    2. A01QSWCN01

      Disconnect the grommet from the floor panel.

    3. Using SST, remove the heated oxygen sensor from the center exhaust pipe assembly.

      SST
      09224-00010

      Note

      Do not damage the heated oxygen sensor.