ACCELERATOR PEDAL INSTALLATION

PROCEDURE

1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY (for RHD)

   Note

   This accelerator pedal does not require lubrication.

   Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

   If applied, the accelerator pedal sensor assembly must be replaced.

   
   

   1. Install the accelerator pedal sensor assembly with the 2 bolts.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Note

      
      

      • Avoid physical shocks to the accelerator pedal sensor assembly.

      
      

      • Do not disassemble the accelerator pedal sensor assembly.

   2. Connect the accelerator pedal sensor assembly connector.

2. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY (for LHD)

   Note

   This accelerator pedal does not require lubrication.

   Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

   If applied, the accelerator pedal sensor assembly must be replaced.

   
   

   1. Install the accelerator pedal sensor assembly with the 2 bolts.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Note

      
      

      • Avoid physical shocks to the accelerator pedal sensor assembly.

      
      

      • Do not disassemble the accelerator pedal sensor assembly.

   2. Connect the accelerator pedal sensor assembly connector.